Bluestone Tiles & Paving Stone from Sydney Suppliers, Bellstone
Bellambi Polished Bluestone Tiles - Makes a Room Sparkle
It is rare for stone to achieve a surface lustre to this degree. It happens rarely and only with bluestone of exceptional quality. Polished Bellambi has been used in foyers, lobbies and bathrooms with stunning effect. Under good lighting it makes a room sparkle with a formality few products can match.
Stone Tests - Independent & Honest Information to Reduce Risk
Testing stone is a fiddly and expensive process. Information on our test results are published so that our customers have a better understanding of a stone's capabilities. As new tests are completed they replace the old tests; nothing has been omitted or edited. Information on buying, fixing, maintaining and sealing stone products is available in the user guide section.
Bellstone's Bellambi Bluestone - No Big Holes
Bellambi bluestone's has a beautiful uniform surface with only small 'pin prick' sized holes on its surface. Most other, less dense types of bluestone have much larger and very pronounced surface holes which tend to gather dirt and grease - they also weaken the stone.
We recommend that our bluestone be pre-sealed prior to installing or laying to prevent grout residues penetrating the stone pores.Stone Quality Ratings
The stone quality ratings below are based on objective test results; they are presented in a simple 1 - 5 star format to make interpretation easy. As you will see Bellambi bluestone is a star performer.
Free Consultation
Ring 1800 663 235 now and make an appointment for a free consultation with our technical adviser; visit our showroom and inspect our products for yourself or accept our offer of a tour of the warehouse.
Bellambi Bluestone Tile – Polished & Calibrated
Specifications
600x400x12mm
Click here to see all bluestone specifications.
Stone Quality Rating - Bellambi Bluestone (polished)
(5 stars = best quality)
|
Density |
 |
|
Porosity (5 stars = very low porosity) |
 |
|
Water absorption (5 stars = very low absorbency) |
|
|
Flexural strength (dry) |
|
|
Flexural strength (wet) |
|
|
Slip resistance |
 |
|
Resistance to salt attack (durability) |
|
Indicative Test Results
Slip resistance (AS/NZS 4586-2004) - 19Z (risk of slipping when wet = very high)
Flexural strength (ASTM C880) (dried) - 30.7 MPa
Flexural strength (ASTM C880) (wet) - 24.0 MPa
Density (ASTM C97-02) - 2802 kg/m3
Water absorption (ASTM 616) by volume (porosity) - 3.25%
Water absorption (ASTM 616) by weight - 1.16%
Resistance to salt attack weight loss (AS/NZS 4456.10) - 1.18%
Resistance to salt attack classification (AS/NZS 4456.10) - A (suitable for wet, dry & salt attack cycles)
Resistance to salt attack (AS/NZS 4456.10) mode of decay - very slight surface pitting
NB The benchmarks for use of stone around salt water pools is 0.1% weight loss or less with a minimum slip resistance classification of W.
Click here to see all test results