Bellandra Sandstone Tiles & Sandstone Pavers
 |
 |
 |
Bellandra Sandstone Tiles - No Stone Less Processed & More Natural
Bellandra sandstone tiles look natural and are natural. A measure of the environmental credentials of a building product is the involvement by man and process up to the point where it is fixed to a building. On that basis this stone is a clear winner. Unlike Australian sandstones it cleaves or splits quite naturally when hit with a chisel and doesn't need expensive machinery to saw or cut it. That's why it is described as having a "natural split surface" - a quality very few sandstones possess. It does mean the thickness of the material varies a bit - but that's quite natural.
Stone Colours & Texture Enhanced with Natural Split Surface
Bellandra sandstone splits naturally along planes revealing pallets of vivid colour not seen in stone with processed surfaces. The topography of the surface is intricate and has character, depth and grain - as you will see in the images above. You will notice that the surface texture is most obvious when viewed at a tangent as illustrated in the photo on the left, above. Stone flakes that are occasionally seen are the best indicators that the stone is high enough quality to split naturally - they are easily removed before fixing.
Bellandra Sandstone Tiles - Natural Split Surface
These tiles are suitable for wall cladding as well as flooring.
 |
 |
Bellandra Sandstone Bullnose Coping - Natural Split Surface & Calibrated
Bellandra Sandstone Bullnose Tread - Natural Split Surface & Calibrated
Bellandra Sandstone Ledge Tile - Natural Split Surface & Calibrated
Specifications
Tiles - 400x400x15mm & 600x300x15mm
Bullnose Coping - 300x300x22mm & 400x400x22mm
Tread with bullnosed edge - 1000x350x30mm
Ledge Tile - 400x400x15mm with 25mm bullnose edge
For more information on sandstone products go to specifications.
Stone Quality Rating - Bellandra Sandstone (Natural Split Surface)
(5 stars = best quality)
|
Density |
 |
|
Porosity (1 star = highly porous) |
 |
|
Water absorption (1 star = highly absorbent) |
|
|
Flexural strength (dry) |
|
|
Flexural strength (wet) |
 |
|
Slip resistance |
 |
|
Resistance to salt attack (durability) |
 |
Indicative Test Results
Slip resistance (AS/NZS 4586-2004) - 56V (risk of slipping when wet = very low)
Flexural strength - dried (ASTM C880) - 15.6 MPa
Flexural strength - wet (ASTM C880) - 13.5 MPa
Density (ASTM C97-02) - 2421 kg/m3
Water absorption (ASTM C97-02) by volume (porosity) - 6.8%
Water absorption (ASTM C97-02) by weight - 2.8%
Resistance to salt attack weight loss (AS/NZS 4456.10) - 0.4%
Resistance to salt attack classification (AS/NZS 4456.10) - A (suitable for wet, dry & salt attack cycles)
Resistance to salt attack (AS/NZS 4456.10) mode of decay - very slight surface pitting
NB The benchmarks for use of stone around salt water pools is 0.1% weight loss or less with a minimum slip resistance classification of W.
For more information go to test results.
Free Project Consultations & Samples - Phone Us & See
Visit our showroom - we have a technical support team who would be happy to take you through our product range and help with your project requirements. Please call us on 1800 663 235 to discuss your needs. Go to Contact & Staff for further details.
Obligation Free Quote
If you have a project in mind and would like us to arrange a quote (supply and/or fixing), contact us on the number below. There is absolutely no charge for this service nor obligation to proceed.
Contact Bellstone Today - Ph 1800 663235 (8am - 4pm, Monday - Friday)
If afterhours or weekends, email us info@bellstone.com.au with a contact number and we will ring you within 1 working day.