Travertine Tiles & Pavers for Floors, Patios & Alfresco Dining
 |
|
|
Click here for a free project consultation
Classico Travertine Floor Tiles - Honed
These premium quality, crosscut travertine floor tiles exhibit beautiful light chocolate, caramel and beige colours.
The material is extremely dense and contains fewer holes than most travertine, many of which are small in diameter.
The surface has been honed and the holes left unfilled to provide character. The edges have been sawn and as you can see from the photograph on the right and below the corners meet cleanly indicating the quality of the workmanship.
The thickness of each tile has been calibrated to 13mm.
Stone Colour & Pattern Variation 
Like all natural stone, Classico travertine has variation in both colour and pattern, despite the fact that they have been factory sorted for both.
The challenge is to always achieve consistency in both colours and patterns but maintain the individuality of each piece that make up the whole.
This requires careful scrutiny in the factory so that rogue pieces are removed.
Click here for a free project consultation
Classico Travertine - Popular Uses
Classico travertine is really tough and very dense so it can be used almost anywhere.
The most popular uses are kitchens, bathrooms, living areas, verandahs and outdoor rooms.
Suitability for Paving Around Saltwater Pools
The test results for Classico are as good as our quartzite and bluestone for resistance to salt attack and it is well under the benchmark for use around saltwater pools. This is a beautiful, dense travertine with impressive durability credentials.
Warning - "Even though the stone has been found to be very durable, it should be noted that the incorrect use of sealers or surface treatments can adversely affect the stone's performance" - Jim Mann, Principal Stone Initiatives.
Travertine - Sealing Recommended for High Risk Areas 
Classico is very dense with low porosity so it has a natural ability to resist penetration from agents that may discolour or stain the stone. In low risk areas that are swept and hosed clean (to remove leaves, debris etc) sealing may not be required.
This travertine has lovely earthy colours and while it is unlikely to show dirt stains - coffee, tea, wine, oil and grease will all disclour the stone if ignored.
The most vulnerable spots are kitchens and entertainment & BBQ areas where food and drink spillages are more likely. Even a light, cooking grade, olive oil will leave a residue unless the stone is sealed.
Salts in solution from saltwater pools are corosive evn to a stone with such high resistance to salt. Unless you intend to wash the pool surrounds after use to remove salt residues, sealing is probably a good form of insurance. There should not be a problem using Classico around traditionally chlorinated pools.
Two coats of either Ultra-Solv or Sealer's Choice Gold penetrating sealers should provide excellent stain protection for many, many years. Under no circumtances should surface sealers be used on this stone in wet areas or where the stone has been laid on poorly drained substrates. For more information go to Stone Sealers.
Click here for a free project consultation
Classico Travertine - Honed & Unfilled - 400x400x13mm
 |
 |
Classico Travertine - Honed & Unfilled - 600x300x13mm
 |
 |
Classico Travertine - Tumbled 600x300, 600x600x13mm, 600x400x30mm
 |
 |
Classico Travertine - Tumbled - Bullnose Coping 300x400, 400x400x30mm
Click here for a free project consultation
French Pattern - Tumbled 
The images below are of tumbled Classico laid out in a French pattern (4 different size pieces). The images demonstate the precision of the edging and the low hole frequency - characteristics of superior product.
Each piece in the display below has been selected to illustrate the full variation in both colour and pattern.
You will notice that while each piece is endeared with its own personality, when combined they are harmonious as you can see from the image of the bathroom floor on the right.
Poor quality material never achieves homogeneity as rogue pieces jump out at you and ruin the surface tapestry.
The product is sold in modules of 0.72m2 which comprises 1x600x400, 2x400x400, 1x400x200 & 2x200x200mm which is set out in the photo on the right below.
 |
|
| Tumbled Classico in French Pattern
|
Tumbled Classico in French Pattern 0.72m2
|
Tumbled Finish - Popular for Outdoor Rooms - Indoors As Well!
Tumbling involves placing each piece in a giant revolving tumbler with small stones. The process gently buffs the edges so that they become rounded, softer and more irregular in shape.
The surface is less affected but certainly lighter in colour which is in evidence when comparing images of both the honed and tumbled tiles above. Tumbled product is less formal and more rustic looking; it is popular for outdoor areas and alfresco applications but just as popular indoors for bathrooms and rumpus rooms as you can see from the images below - all of which are in french pattern.
 |
 |
 |
Click here for a free project consultation
Specifications
Tiles, honed & unfilled - 400x400, 600x300x13mm
Tiles, tumbled & unfilled - 600x300, 600x600x13mm
Tiles, tumbled & unfilled in French Pattern (600x400, 400x400, 400x200 &200x200)x13mm
Pavers, tumbled & unfilled - 600x400x30mm
Tumbled bullnose coping - 400x400x30mm, 300x400x30mm with a full bullnose on the 300mm side
Larger sizes are available by order
For more information on sizes and formats, go to Product List & Specifications.
Classico Stone Quality Rating
5 stars = best quality
| Density |  |
| Porosity (5 stars = very low porosity) |  |
| Water Absorption
|
|
| Flexural Strength (dry)
|
|
| Flexural Strength (wet)
|
|
| Slip Resistance
|
 |
| Resistance to Salt Attack / Durability
|
 |
Indicative Test Results
Slip resistance (AS/NZS 4586-2004) (honed) - 36X (risk of slipping when wet = moderate)
Slip resistance (AS/NZS 4586-2004) (tumbled) - 40X (risk of slipping when wet = moderate)
Flexural strength (ASTM C880) (dried) - 17.9 MPa
Flexural strength (ASTM C880) (wet) - 17.8 MPa
Density (ASTM C97-02) - 2463 kg/m3
Water absorption (ASTM 616) by volume (porosity) - 2.8%
Water absorption (ASTM 616) by weight - 1.1%
Resistance to salt attack weight loss (AS/NZS 4456.10) - 0.04%
Resistance to salt attack classification (AS/NZS 4456.10) - AA (suitable for wet, dry & salt attack cycles)
Resistance to salt attack (AS/NZS 4456.10) mode of decay - very slight surface pitting
NB The benchmarks for use of stone around salt water pools is 0.1% weight loss or less with a minimum slip resistance classification of W.
For more information, go to Test Results
Free Project Consultation
If you have a project in mind and would like us to arrange a quote (supply and/or fixing), contact us on the number below. There is absolutely no charge for this service nor obligation to proceed.